1. Check the fluid level – The fluid in an automatic transmission operates the clutches, provides cooling and lubrication, and even drives the vehicle. So few things are more important than proper fluid operating level for keeping the transmission working. Most automatic transmission have a dipstick for checking the fluid level. If you’re not sure where yours is or how to check the transmission fluid level, refer to your owner’s manual, or stop in at First Klass Transmission. We’ll be happy to show you.
  2. Check transmission problems promptly – Most transmission problems start out small. They get worse over time. Very often, you can eliminate major repairs simply by taking care of the problem early on. Whether it’s a warning light on the dash, a few drops of fluid on the garage floor, or a change in the way the transmission operates, your best bet is to take your car in to First Klass Transmission for service right away. In many cases you’ll be able to avoid a major repair simply by catching it while it’s still a minor one.
  3. Service your transmission regularly – Transmission fluids have a number of unique properties that can wear out over time. And when they wear out, you can bet the transmission itself won’t be far behind. One of the best ways to keep your transmission in good working order is to have it serviced annually. A complete fluid and filter change every two years can add years to your transmission’s life, and in the end, save you money. Call us today for your appointment.
  4. Add a friction modifier to the fluid – New fluid can really help your transmission last longer. But there are a number of additives on the market that have demonstrated the ability to increase transmission life and reliability significantly, even beyond the extra miles you could expect from regular service. In most cases, you won’t be able to find worthwhile additives in your supermarket or do-it-yourself parts store: The really effective additives are only available to the professional transmission centers. Come into First Klass Transmission today for our recommendations.
  5. Install an auxiliary cooler – The number one reason for transmission failure is heat. Transmission temperatures can quickly exceed 300F. At that temperature, seals begin to harden, clutches begin to burn, and the fluid itself breaks down. To help eliminate excess heat from the automatic transmission fluid, have an auxiliary cooler installed. This is particularly important on vehicles that tow trailers, carry heavy loads, or travel over rough or mountainous terrain. Come in and see us for the best transmission cooler that’s right for your vehicle.
  6. Install a cooler line filter – All automatic transmissions have some type of filter inside them. But these filters vary in effectiveness. Meanwhile, loose dirt and metal particles can quickly erode thrust washer and bushing surfaces, clog up passages, and reduce transmission life. One of the best ways to eliminate these contaminants is to add an in-line filter to the transmission cooler lines. These filters are inexpensive and highly effective in removing damaging particles from the transmission fluid. Call us today for your appointment.
  7. Service the cooling system – You may not realize it, but your car’s cooling system does more than keep the engine running cool: It also cools the transmission fluid, through a heat exchanger built into the radiator tank. So a faulty cooling system cannot only damage your engine; it can reduce transmission life as well. In fact, transmission damage may occur long before the engine overheats. To avoid both engine and transmission problems, keep your car’s cooling system both clean and in tip-top condition.
  8. Tune the engine – The engines and transmissions in today’s cars are linked far more closely than in the past. A problem with engine performance can put much more strain on the transmission than one that’s running properly. That’s another reason why it’s important to keep your car’s engine in good running order. A good running engine reduces the stress on your transmission, so the transmission can last longer without requiring major repairs.
  9. Help the transmission shift – Virtually all transmission wear takes place during the shifts; almost none occurs between the shifts. So one way to reduce transmission wear is to reduce the load during the shifts. Pay attention to the speed when your transmission shifts normally. Then, just before the normal shift speed, learn to back off the gas just a bit. Easing off the gas will force the shift, while reducing the load on the clutches; A sure way to improve transmission life.
  10. Take your transmission to an ATRA Member Center – One of the best ways to get more life out of your transmission is to have it serviced regularly at an ATRA member repair center. ATRA members receive access to the latest technical information and training, and must meet a rigid set of requirements to display the ATRA name. The ATRA logo is your assurance that the shop you’ve selected provides quality service at a reasonable price. Don’t trust your transmission work to just anyone…always look for the ATRA logo when choosing a transmission repair center. First Klass Transmission is your local ATRA Automatic Transmission Rebuilders Association member.

Our best form of advertising is word of mouth, so ask about us…First Klass Transmission!